BYRMT - R64-0002-800 EP-S TONER CARTRIDGE BLACK WT/280G
- MSDS: BYRMT
- Manufacturer: CANON INC
- Product Name: R64-0002-800 EP-S TONER CARTRIDGE BLACK WT/280G
- National Stock Number: 6850-00F046354
Product Identification
Product ID:R64-0002-800 EP-S TONER CARTRIDGE BLACK WT/280G
MSDS Date:02/01/1996
FSC:6850
NIIN:00F046354
MSDS Number: BYRMT
Responsible Party
TOKYO
JA
Emergency Phone: 03-3758-2111
Info Phone: 03-3758-2111
Cage: EO274
Contractor
Telephone: 516-328-5600
Cage: 1BA63
Ingredients
IRON OXIDE, MAGNETITE *95-4*
CAS: 1317-61-9
Fraction By Weight: 30-40%
CHROMIUM METAL, CHROMIUM, CHROME (KNOWN CARCINOGEN BY NTP;
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 0.5%
ACGIH TLV: 0.5 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CHROMIUM COMPOUNDS (TYPE NOT SPECIFIED)
Fraction By Weight: 2-5%
STYRENE ACRYLATE COPOLYMER *95-4*
CAS: 23153-46-2
Fraction By Weight: 60-70%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HUMAN EXPOSURE TO TONER
HAS BEEN SHOWN TO CAUSE MINIMAL RESPIRATORY TRACT IRRITATION. EYES:
MAY CAUSE TRANSIENT IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: WASH OUT IMMEDIATELY
W/WATER. SKIN: WASH W/SOAP & WATER. INGESTION: DRINK 1-2 GLASSES OF
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NON-FLAMMABLE SOLID. TONER MATERIAL, LIKE
MOST ORGANIC MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING A DUST
EXPLOSION.
Accidental Release
Spill Release Procedures:AVOID INHALATION OF THE DUST. SWEEP MATERIAL
ONTO PAPER & DISPOSE COLLECTED TONER AS PLASTIC WASTE.
Handling
Handling and Storage Precautions:USE ADEQUATE VENTILATION. STORE IN A
COOL PLACE. MINIMIZE DUST GENERATION & ACCUMULATION.
Other Precautions:AVOID BREATHING DUST. KEEP FROM CONTACT W/OXIDIZING
MATERIALS.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD (TYPICALLY 4-6 ROOM VOLUMES PER HOUR) SHOULD BE USED.
Protective Gloves:IMPERVIOUS
Eye Protection:REQUIRED
Other Protective Equipment:WASHING FACILITIES
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:212-302F
Spec Gravity:1.4-1.6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINE POWDER W/TYPICAL PLASTIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO2, CO
Disposal
Waste Disposal Methods:INCINERATE/LANDFILL, CAN BE INCINERATED
IAW/FEDERAL, STATE & LOCAL REGULATIONS. DISCHARGE,
TREATMENT/DISPOSAL MAY BE SUBJECT TO NATIONAL STATE/LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.